E1 Power Supply

img_473e82bf1ce6.png

When to Replace

  1. The device does not respond when connected to power and fails to power on normally.
  2. The device restarts automatically.

Safety Tips

Before performing any maintenance on the air purifier and its electronic components, power off the device and disconnect the power supply to prevent circuit shorts, which can cause additional device damage and safety risks. Before maintenance or troubleshooting, please ensure that the relevant parts have cooled down.

Tools and Materials

  • H2.0 Allen key

Remove the E1 Power Supply

Passo 1. Remove the Filter Element

Disconnect the air duct connected to the purifier, the Power Cable, and the 6-pin cable (if any).
img_7435483712db.png

Slide the rear cover upwards to remove it.
img_bdecd87a5c1e.webp

Remove the air filter handle, pinch it, and pull out the air filter.
img_1b59bdb65368.webp

Passo 2. Separate the Front and Rear Housings

Peel off the three foam strips shown.

img_ea65db2d1931.webp img_49ec1bf04430.webp
img_c657f36bae53.webp

Turn the device over and remove the footpads from the front housing.
img_01b955ba79af.webp

Use an H2.0 Allen key to remove two screws.
img_66b355df62d0.png

Use an H2.0 Allen key to remove the seven screws as shown.
img_e45d175eeb9c.png

Separate the front and rear housings, then disconnect the connecting cables between them.
img_59943b1ca9ce.webp

Passo 3. Remove the E1 Power Supply

Before proceeding, confirm that the device’s power cable is disconnected. Wait at least 1 minute after disconnecting the power before proceeding with the next steps.
Remove the power output cable from the cable management channel.
img_3e35a6df2bc4.png

Use an H2.0 Allen key to remove the two screws.
img_86a16a384072.png

Lift out the power supply and open the E1 power supply housing.
img_6c01c0a608f0.webp

Disconnect the power input plug, and remove the E1 power supply module.
img_17aeb70e5604.webp

Note: The power plug has a locking tab. You need to press the locking tab as shown in the diagram before pulling it out. Do not pull forcefully.
img_4d00660bda94.png

Install the E1 Power Supply

Passo 1. Install the E1 Power Supply

Open the power supply housing and connect the power input plug. The two black cables can be connected in either order. Then close the power supply housing, ensuring that the cables are not pinched.
img_a9020a6743e3.png

Reinstall the power supply in its original position and tighten the two screws using an H2.0 Allen key.
img_86a16a384072.png

Arrange the power output cables.
img_3e35a6df2bc4.png

Passo 2. Install the Front and Rear Housings

Connect the three plugs as shown, then close the front and rear housings.
img_f2016127d761.png

Use an H2.0 Allen key to secure the seven screws.
img_e45d175eeb9c.png

Turn the device upside down and use an H2.0 Allen key to secure two screws.
img_66b355df62d0.png

Attach the footpads.
img_78c4f0847459.png

Attach the foam strips around the air filter.
img_22df9218a3d1.png

Passo 3. Install the Filter Element

Install the filter element, ensuring the handle side faces outwards.
img_06d637b9d826.webp

Tuck the air filter handle into the filter mesh to avoid obstructing the rear cover installation.
img_479ed8afeffe.png

Install the rear cover.
img_97c66324855e.webp

Reinstall the purifier air duct, Power Cable, and 6-pin cable (if any).
img_d9e789a11aaf.png

Verify Functionality

After completing the replacement, connect the power and start the device. Confirm that it powers on normally and operates stably. Check that the display, buttons, and fan speed settings respond normally, with no unexpected power interruptions, automatic restarts, or error messages.

Notas Finais

We hope this guide has provided clear and practical support.
If the issue remains unresolved, please submit a support ticket and include your recent printer logs and additional pictures or other details. Our customer support team will review your request and provide detailed assistance.
You can also visit Bambu AI, which can instantly answer common questions and provide you with operational guidance.