Cutter Push Arm Assembly Replacement Guide for the H3C
Bambu Lab H3C • Série Industrial H3
Cutter Push Arm Assembly Replacement Guide for the H3C
Cutter Push Arm Assembly

Applicable Printer Model
Bambu Lab H3C
When to Replace
When the Cutter Push Arm Assembly is physically damaged and affects its movement.
Safety Tips
Before performing any maintenance on the printer and its electronic components (including the Toolhead Cable), turn off the printer and disconnect the power supply to prevent accidental Screen touches or short circuits, which could cause additional electronic damage and safety hazards.
When performing maintenance or troubleshooting on your printer, please first check the temperature of the hotend and heatbed. Avoid operating at high temperatures. If operating at high temperatures is unavoidable, wear insulated gloves to ensure safe and effective maintenance.
Tools and Materials
- H2.0 allen key
- H1.5 Allen Key
Remove the Cutter Push Arm Assembly
Passo 1. Remove the Front-Right Cover of the Toolhead
Use an H1.5 allen key to remove 2 screws.

Apply gentle force to both the top and bottom ends, slide the right front cover to the right, then remove it.

Passo 2. Remove the Cutter Push Arm Assembly
Use the H2.0 Allen key to remove 1 screw from the cutting assembly. Remove the screw, cutting assembly, and spring from the toolhead.
![]() |
![]() |
Install the Cutter Push Arm Assembly
Passo 1. Install the Cutter Push Arm Assembly
Install one leg of the cutting spring into the small hole in the corresponding position, then insert the cutting shaft screw through the cutting assembly. Note: The screw has a washer; prevent it from falling off.
![]() |
![]() |
Lock the Cutter Push Arm Assembly back onto the toolhead. Ensure the other edge of the spring engages with the notch on the cutting assembly. Hold the Cutter Push Arm Assembly vertically upwards with your hand, then tighten the shaft screw.
![]() |
![]() |
Verify Functionality
Flick the Cutter Push Arm Assembly to ensure smooth operation.
Notas Finais
We hope this guide has provided clear and practical support.
If the issue remains unresolved, please submit a support ticket and include your recent printer logs and additional pictures or other details. Our customer support team will review your request and provide detailed assistance.
You can also visit Bambu AI, which can instantly answer common questions and provide you with operational guidance.






