Dock Assembly

The assembly installed on the SwapTek Rack, used to nest idle PrintTools.
39_dock_assembly_replacement_guide_for_the_h3c_aecdc3ad1d.jpg

Applicable Printer Model

Bambu Lab H3C

When to Replace

Structural damage or magnet detachment occurs, affecting the fixation or detection of the PrintTool.

Safety Tips

Before performing any maintenance on the printer and its electronic components (including the Toolhead Cable), turn off the printer and disconnect the power supply to prevent accidental Screen touches or short circuits, which could cause additional electronic damage and safety hazards.
07_ap_board_replacement_guide_for_the_h3c_01457bbe50.jpg

When performing maintenance or troubleshooting on your printer, please first check the temperature of the hotend and heatbed. Avoid operating at high temperatures. If operating at high temperatures is unavoidable, wear insulated gloves to ensure safe and effective maintenance.

Tools and Materials

  • H1.5 Allen Key

Remove the Dock Assembly

Passo 1. Remove the Printtool

Hold the upper part of the PrintTool assembly with your hand, lift it diagonally upwards, and detach the corresponding PrintTool assembly.
38_flow_blocker_replacement_guide_ed45d93eb1.jpg

Passo 2. Remove the Dock Assembly

Using the H1.5 allen key, remove the 3 screws, then remove the Dock Assembly from the inside of the cavity.

39_dock_assembly_replacement_guide_for_the_h3c_a99968132c.jpg 39_dock_assembly_replacement_guide_for_the_h3c_5abbf18444.jpg

Install the Dock Assembly

Passo 1. Install the Dock Assembly

From the inside of the cavity, install the Dock Assembly onto the SwapTek Rack. Align the screw holes, then insert and lock the 3 screws from the front of the frame to secure it.

39_dock_assembly_replacement_guide_for_the_h3c_5abbf18444.jpg 39_dock_assembly_replacement_guide_for_the_h3c_a99968132c.jpg

Passo 2. Place the Printtool

Retract the PrintTool into the printer chamber. First, align it with the orange installation guide slot, then let the magnets pull it into place and nest it onto the hanger.

38_flow_blocker_replacement_guide_d2c06f628f.jpg 38_flow_blocker_replacement_guide_2bc8c76d61.jpg

Verify Functionality

Power on the printer and perform a docking calibration; as long as it can be completed normally, the replacement was sucesseful.
39_dock_assembly_replacement_guide_for_the_h3c_a3e498d107.png

Notas Finais

We hope this guide has provided clear and practical support.
If the issue remains unresolved, please submit a support ticket and include your recent printer logs and additional pictures or other details. Our customer support team will review your request and provide detailed assistance.
You can also visit Bambu AI, which can instantly answer common questions and provide you with operational guidance.