Toolhead Cover

The toolhead cover consists of 4 specific parts and is divided into two SKUs. The toolhead front cover includes the left and right front covers, which are installed on the front of the toolhead. The toolhead rear cover includes the toolhead top cover and the toolhead rear cover, which are installed on the top and rear of the toolhead, respectively.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_9533ace220.jpg

Applicable Printer Model

Bambu Lab H3C

When to Replace

  • Toolhead cover damaged during shipping
  • Structural damage to the toolhead cover during disassembly/assembly

Safety Tips

Before performing any maintenance on the printer and its electronic components (including the Toolhead Cable), turn off the printer and disconnect the power supply to prevent accidental Screen touches or short circuits, which could cause additional electronic damage and safety hazards.
When performing maintenance or troubleshooting on your printer, please first check the temperature of the hotend and heatbed. Avoid operating at high temperatures. If operating at high temperatures is unavoidable, wear insulated gloves to ensure safe and effective maintenance.

Tools and Materials

  • H1.5 Allen Key

Remove the Toolhead Cover

Passo 1. Remove the Left Toolhead Front Cover

Use an H1.5 allen key to remove 2 screws.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_79d20845a1.png

Gently pry the left front cover loose along the left side, then remove it.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_c128be8603.jpg

Passo 2. Remove the Right Toolhead Front Cover

Use an H1.5 allen key to remove 2 screws.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_d821f1c5a5.jpg

Apply gentle force to both the top and bottom ends, slide the right front cover to the right, then remove it.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_3d55c7e69d.jpg

Passo 3. Remove the Toolhead Top Cover

Use an H1.5 Allen key to remove the 2 screws on the top and the 2 screws in the print head mounting slot.

40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_6be2c07f84.jpg 40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_463930a136.jpg

Pry upwards on the top cover and detach it from the narrower section of the cable chain bracket.

40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_35041c2d7d.jpg 40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_b44450ab16.png

Passo 4. Remove the Toolhead Rear Cover

Use an H1.5 Allen key to remove the 2 screws on the back.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_9039d7cf85.jpg

Pry backward to detach and remove the toolhead rear cover.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_c742b57a7d.jpg

Install the Toolhead Cover

Passo 1. Install the Toolhead Rear Cover

Align the screw posts with the screw holes, install the rear cover onto the back of the toolhead, and press down to secure it.

40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_87ee7602bc.jpg 40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_887baa62f9.jpg

Secure with 2 screws.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_9039d7cf85.jpg

Passo 2. Install the Toolhead Top Cover

Align the notch on the top cover with the narrower section of the cable chain bracket, and press down to snap it into place.

40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_b44450ab16.png 40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_b837970f52.jpg

Secure with 2 screws each at the top and in the print head mounting slot.

40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_6be2c07f84.jpg 40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_463930a136.jpg

Passo 3. Install the Right Toolhead Front Cover

Align the right front cover with the mounting slot on the right side of the toolhead and press near the X-axis to ensure it is properly installed. During installation, align the highlighted features first, then slide the entire cover to the left to ensure a gap-free fit.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_2f7cbcc27b.jpg

Secure with 2 screws.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_d821f1c5a5.jpg

Passo 4. Install the Toolhead Left Front Cover

Install the right front cover by aligning its curved notch with the upper optical axis of the X-Axis, and press the left front cover to ensure it is properly seated.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_385ec0253b.jpg

Secure with 2 screws.
40_toolhead_front_and_rear_cover_replacement_guide_for_the_h3c_79d20845a1.png

Verify Functionality

Check the gap between the covers to ensure there is no obvious lifting or misalignment.

Notas Finais

We hope this guide has provided clear and practical support.
If the issue remains unresolved, please submit a support ticket and include your recent printer logs and additional pictures or other details. Our customer support team will review your request and provide detailed assistance.
You can also visit Bambu AI, which can instantly answer common questions and provide you with operational guidance.