Spool Holder/PTFE Tube Connector Replacement Guide for the P2S/X2D
Bambu Lab P2S • Série Performance P2
Spool Holder/PTFE Tube Connector Replacement Guide for the P2S/X2D
Spool Holder/PTFE Tube Connector
Spool Holder: A plastic bracket mounted on the back of the printer to hold an external filament spool.

PTFE Tube Connector: A connector used to connect the PTFE tube to the filament spool.

Note: P2S have three locations on the back where a spool holder can be installed. You can choose the location based on your actual situation. Additional holders can be obtained by downloading and printing the model or by printing from the built-in models. G-code: spool_holder.gcode.3mf STL: spool_holder.stl
When to Use This Guide
- Spool holder is damaged
- PTFE tube connector has failed
Note: This guide can also be used as a reference when changing the PTFE tube connector position.
Required Tools and Materials
- New spool holder
- H2.0 Allen key
Aviso de Segurança
IMPORTANT!
Always power off and disconnect power on the printer before performing maintenance work. Not doing so means there is a risk of electric shock, short circuit, and damage to the printer or surrounding area.
When a maintenance task necessitates the printer being powered on, use insulated gloves for safety and pay special care not to pinch, damage, or put pressure on any exposed wires, connectors, or circuit boards. Additionally, the nozzle can be extremely hot so never touch it with exposed skin.
If you have any questions or concerns related to the above or the steps in this guide, please open a new ticket in our Support Page for assistance.
Removing the Spool Holder
Passo 1: Remove the Spool Holder
Hold the spool holder and pull it out from the side of the printer.

Passo 2: Disassemble the Spool Holder
Hold the end where the filament tube connector is installed, push against the spool shaft and use force to separate the spool holder.

Warm Reminder: When separating the spool holder, the first operation may be slightly laborious. It is recommended to shake the holder up and down first, then pull it out smoothly.
Passo 3: Remove the PTFE Tube Connector
Use an H2.0 Allen key to unscrew the round head screw and remove the ptfe tube connector.

Passo 4: Remove the Spool Holder Base
Use an H2.0 Allen key to remove the two screws and remove the spool holder base.

Installing the Spool Holder
Passo 1: Install the Spool Holder Base
Place the spool holder base in the desired installation position and secure it with two screws.

Passo 2: Install the PTFE Tube Connector
Install the ptfe tube connector to the tube bracket and tighten the round-head screw with an H2.0 Allen key.

Passo 3: Install the Spool Holder
Install the spool onto the holder base and ensure you hear a click indicating it is properly seated.

Passo 4: Connect the Spool and Filament Tube bracket
Align the tube bracket with the mounting hole, then connect it to the spool bracket. Installing the spool shaft separately can help prevent errors in the orientation of the PTFE tube connector.

Verifying Functionality
- The spool holder should completely cover the holder base and not slide easily.
- The PTFE tube connector should face upward.
Notas Finais
We hope this guide has provided clear and practical support.
If the issue remains unresolved, please submit a support ticket and include your recent printer logs and additional pictures or other details. Our technical team will review your request and provide detailed assistance.
You can also visit Bambu AI, which can instantly answer common questions and provide you with operational guidance.


